Re: ADV7630 internal EDID issue
Hi, I've moved this discussion from the Other ADI Processors community to the Video community. Please continue this discussion here. Thanks,Colin
View ArticleRe: EPPI and PVP configuration not working
Hi, Ive moved this discussion from the Processors and DSP community to the ADSP-BF60x community. Please continue this discussion here. Thanks,Colin
View ArticleRe: Couldn't R/W via Memory Browser
Hello, David,Thank you for your response.This question had be solved by itself. So could be closed. Thanks,Sofy
View ArticleClik here to view.
Re: delay a signal for n milliseconds
Hi Dimitris, Ive moved this discussion from the Processors and DSP community to the SigmaDSP Processor and SigmaStudio Development Tool community. PLease continue this discussion here. Thanks,Colin
View ArticleRe: verilog file missing in HDL_Master
Hi Istvan, Thanks replying for my request, We are using AD9364 in our design for custom data acquisition board, initially we planned to try the reference HDL provides from AD website and implement the...
View ArticleFailed to read a ADV7282-M register
Hi I am debugging ADV7282-M chip,image has been displayed in lcd screen.I can write a adv7282-m register,but not read a register. Please refer to the attachment to get read timing. The...
View ArticleRe: bf606 usb can not work after disconnect device while working in host mode
HI, Aaronwu,can you give me a response in this thread after you fix this bug? thank you.
View ArticleRe: A question about AD-FMCOMMS1-EBZ
Sorry i don't know where can type dmesg. Are you mean type in Linux OS? We use the no-OS Driver ,where can we type dmesg? And how to type dmesg? Thanks!
View ArticleRe: verilog file missing in HDL_Master
Hi Ranjan, Please check out this thread, to see how can you reduce the number of channels from two to one. Thanks,Istvan
View ArticleRe: Preamplifier (impedance matching) for EVAL-AD7357EDZ
Hi Dimitrios, You may also want to read the CN-0350 (12-Bit, 1 MSPS, Single-Supply, Two-Chip Data Acquisition System for Piezoelectric Sensors). This can give you an idea on designing a signal...
View ArticleAD9361 TX power collapse
hi everyone I work on FMCOMMS2 board with my own XILINX V6-FPGA. TEST environment:FDD, TXLO: 2.45GHz, BBPLL:983.04MHz, BBBW:5MHz, test signal: 100kHz cos and sin to be I and Q without attenuation....
View ArticleRe: AD7266 Data access time
Hi Karen, Could you give me any comment for this matter?I amworried aboutwhether my explanation is enough or not.If you have any questions or unclear points, please let me know. Best Regards,yk
View ArticleRe: Re: AD5933 EVAL
Hi Pawel, You can start off using a 200kohm resistor as your Rfb. With the resistance you are measuring (150kohm), you should be able to get the correct reading. We have tried it in bench before, and...
View ArticleClik here to view.
Re: ADSP-21489 algorithm source code
You may also want to look into SigmaStudio for SHARC, which provides a number of these modules in a graphical development environment. Regards,Craig.
View ArticleRe: Problems with adc_capture() for no-os with fmcomms2.
Hi Istvan, When I put ad9361_en_dis_tx(ad9361_phy, 1, TX_DISABLE); after ad9361_init() i receive an error saying that "undefinit reference to ad9361_en_dis_tx(). I don't know if I am missing something...
View ArticleRe: CCES Debug setting
Hi, The Debug Configurations aren't linked directly to a project, so it cannot automatically select a DXE for you. There are a few options:1. Manually change the Debug Configuration to launch the...
View ArticleStatus and usage of ad9625_fmc
Dear community, I would like to use the AD-FMCADC2-EBZ FMC evaluation board in tandem with a KC705 Kintex board to set up a rapid prototyping environment for an upcoming project in which we are going...
View ArticleRe: Setting up the communication between zedboard and pc via ethernet cable.
Hi, It is possible that your PC is not responding to pings. To test the connection you can try to access the network share on the ZED board. On your PC open up a explorer and in the address bar type...
View ArticleRe: Driver - ADZS-HPUSB-ICE
Hi Ismael, I've moved this thread to the Hardware Tools community. Please continue the discussion here. In order for us to assist you, can you please confirm the tools you're working with, and which...
View ArticleRe: Failed to read a ADV7282-M register
I have confirmed that reading other register are also not acknowledging.for example,42 03 42 02 42 FD 42 FEIt is a strange thing that I can write to any register when...
View Article