Re: AD9361 - IIO Oscilloscope
Hi, How exactly are you handling the buffers that you use to capture the data that you do the FFT on? The data in a single buffer will always be contiguous, but if you do multiple captures and...
View ArticleCurrent limiting for ADUM3070
Hi there,I checked out the behavior of current limiting on ADUM3070 Evaluation board.But I noticed the performance is a bit different from what I expected.The datasheet says it works with cycle by...
View ArticleRe: ADV7182 creates dark line at bottom with NTSC input when ACE is ON
Hi Suresh,Could you please describe your system. Are you using an ADV7182 evaluation board or are do you have the ADV7182 in a system. If it is in a system would you mind telling me what is processing...
View ArticleADN4604 for TFT Monitor
Dear all, I'm going to design a monitor for 4k and I need 4 HDMI inputs (1.4 specification, up to 4k2k 30p), without HDCP and at least with 10bits of resolution I need process each one of HDMI inputs...
View ArticleVideo mixer/fader part number ?
I there, Some years ago I saw a chip which I would now be interested in --- of course I don't remember the part number The device would perform the weighted addition of two (analog) video signals, for...
View ArticleClik here to view.
ADV7619 support 4K2K/30Hz and 1080P/120Hz
Hello, Sir I got customer inquiry with ADV7619 that RD would like to support 4K2K 30Hz and 1080P/120Hz.I tried to check CEA-861 standard, but I can't find 1080P/120Hz video format support.Is ADV7619...
View ArticleRe: Sigmastudio algorithms
Thanks Bob, That confirmed my findings, i wonder if Miguel can confirm if this block will ever be available. It would really help reduce the number of resources in this project
View ArticleClik here to view.
Re: How to keep the SD of AD-FMCOMMS3 stay up to date?The wiki page is not...
Hi Jie, I have tested all the files and everything seems to be fine. I have done the following steps: - write the zynq_image_8gb_....img.xz to SD card (Zynq Quick Start Guide [Analog Devices...
View ArticleRe: ADZS-ICE-100B and urjtag
i am running gentoo/linux on x86/32bit machinemy portage is synched to the last available. my kernel version is 2.6.39, and i do not want to update it to 3.x exactly what do you suspect the problem...
View ArticleRe: ADZS-ICE-100B and urjtag
I suspect it might be related to libusb. Gentoo should be OK, too. One of UrJTAG upstream maintainer uses Gentoo. He also used UrJTAG with ICE-100B long time ago. Currently I have no idea about this...
View ArticleRe: AD9361 REF_CLK Level
Could you explain it a little more in detail?I am a little confused about how a 39pf series cap can help in dividing 1.8Vpkpk down to 1.3Vpkpk.thanks
View ArticleRe: How to build the Eval AD5933 drivers with IAR Workbench
Unfortunately we will not be able to store the values in the PC. We're creating a prototype device that needs to move freely and can't always be near a PC. Without the ability to add memory to the...
View ArticleClik here to view.
Re: How to use sigmastudio software to realize an external potentiometer to...
Hi Bro, Thanks for the clarification, I assumed your noise was while turning the pot, since I could not hear any otherwise. As it turns out, you need to update your SigmaStudio to at least...
View ArticleRe: GNU baremetal toolchain with BF506F
Hello again. My application doesn't run in the debugger because the static variables (global or included in functions) aren't initialized to planned values, i.e. in the expression:static unsigned char...
View ArticleRe: What is the Technique of PulSAR?
As explained in AN-931, ADI uses proprietary internal switched capacitor techniques to extend the resolution of SAR ADCs to 18 bits using CMOS process, which does not require laser trimming....
View ArticleRe: FMCOMMS5
Shay, We have updated the boot image, so now it's possible to obtain the FMCOMMS5 builds using adi_update_boot.sh script. Regards,Dragos
View ArticleRe: ADZS-ICE-100B and urjtag
problems could be related to library, kernel drivers, or applications, more specifically- which version of software components- which flags (1) used to compile the software components- hardware...
View ArticleClik here to view.
Re: ADZS-ICE-100B and urjtag
Suspecting the issue is related to the EHCI i have plugged a PCMCIA EHCI module on my laptop expansion slot. This module is certified to be fully USB2 compliant, it uses a VIA chip memory mapped to the...
View ArticleError li1021-adi_DynamicMemInit issue
Hi there,I am trying to implement a contour detection/segmentation algorithm. It should all be working fine, but i'm getting this error. [Error li1021] The following symbols referenced in processor...
View ArticleRe: Chaneg adv7511 to output video with a fixed resolution
in the Linux side, I want to change the driver to complete it
View Article