Op amp to drive 10uF capacitor
The datasheet for the AD5541A DAC (http://www.analog.com/static/imported-files/data_sheets/AD5541A.pdf) recommends using an AD8628 op amp...
View ArticleAVES3 reads back only zeros from ADV8005
Hi, I have the EVAL-ADV8005-SMZ and I'm using AVES3.To connect to this board, I'm using an Aardvark and USB-to-Serial connection.In AVES3 (with Aardvark), the read out of registers from the ADV7842 and...
View ArticleCan HMC929LP4E support a bi-directional signal ?
Do you have any information about if we can use HMC929 by dual-directional signal line?
View ArticleRe: Op amp to drive 10uF capacitor
Hi James,I am the applications engineer supporting the AD5541A. I can't recommend a suitable amplifier, (though someone on this forum should be able to) but I can give some pointers. The AD5541A is an...
View ArticleRe: Bitstream from EVAL-CED1Z
Hi Jarwin Tee, Thank you for your answer. I could not find an AD7402 Evaluation Board, I only found the AD7403-Evaluation board. The Software user guide of this board does not mention the capture of...
View ArticleClik here to view.
Re: Question: RS485 connection between 5V and 3.3V
Hi Richard, Thanks for your support. I really appreciate it!!I understand what you mean. Please let me ask if there another question comes up. Best regards,Tarzan
View ArticleRe: ADAS1000 amplitude overflow
Hi Sebastian, What version of the software are you using? Please download the latest software from the...
View ArticleRe: ad-fmcomms1-ebz programming FPGA
hi sir..sorry for the inconvenience..i'll explain my problem in detail.I got a reference design tutorial in the following...
View ArticleADL5391
Dear all, I am facing some trouble while using the RF multiplier ADL5391, where our aim is to use it as a squarer (same input over Xp, Yp). Main issue is the fact that we observe reflections over the...
View ArticleRe: AVES3 reads back only zeros from ADV8005
Hi Matt, I have made sure that no RS232 program is running. The few times I tried this "Advantiv serial" connectionoption, it reported "fail". After your post, I tried connecting to the board (using...
View ArticleRe: ad-fmcomms1-ebz programming FPGA
I do not recommend to use the fpgahdl_xilinx repository, is outdated. Please use the hdl repository instead, clone it and generate your own system.bit, following this instructions. After that use this...
View ArticleRe: Linux OS Booting Fail
DearsDoes somedady have any idea for why my DONE LED is not work well? I check the bitstream file for my non-OS. It works well. In Linux-OS case, I follow website procedure and use this bitstream file...
View ArticleHow to verify digital loopback in AD9364?
Hi, We are using AD9364 with Xilinx KC705.Before start using our application (algorithm), I'm trying to verify the digital loopback using the reference design of AD9361. I believe it is implemented in...
View ArticleRe: Reading ADIS16480 Accelerometer Data with the Arudino Uno
don't mind for not replying so long . actually my ADIS16480 is not working properly. connect to you soon on the accelerometer discussion once ADIS16480 is repaired. vishal sawant
View ArticleRe: ADuC 7061MKZ Timer0 input from GPIO
Thanks MMA,That confirms what i have done already is correct and my assumed GPIO ports are OK. Thanks for the code.
View ArticleClik here to view.
Re: Linux OS Booting Fail
Tasi, Make sure that the order of your boot image partitions is: 1. fsbl.elf (the type of this partition has to be bootloader) 2. system.bit 3. u-boot.elfTake a look at the attached...
View ArticleRe: How to set the filter, gain and read the RSSI
Hi, The rssi and hardware gain are attributes of the phy driver. E.g. see the following example code how to read the rssi.#include #include int main(void) { struct iio_context *ctx =...
View ArticleRe: Where can I get the informations about register and it's address?
Hi, You can find all the register information in the AD9361 Design File Package. But we do not recommend that you access the registers directly, but use the IIO interface to modify the device settings....
View Article