Quantcast
Channel: EngineerZone: Message List
Browsing all 36216 articles
Browse latest View live

Re: Register setting of ADV7513

Hi Tak, Unfortunately, I'm not familiar with the signal you are describing. Can you provide some more details? -Matt

View Article


Re: unstable video output from adv7850 when doing VGA 1600x1200 60hz

I just checked we only lose vert. lock or de regen lock. tmds pll & clk are locked depending on the test generator, we lose either vert. lock or de regen lock

View Article


Re: a DSP chip that can have Dolby Digital decoding and be configurable for...

You have a variety of choices. I would start with 4th generation SHARCs. The 2147x is the least expensive and adequate for Dolby and many biquads. If you use the 100 pin parts and a large enough power...

View Article

Re: [ADV8003] Question about Scaling, De-interlacing & PtoI

Hi Shogo, Please review the HW manual for ADV8003 and the HW manual for ADV8005. It contains a good description of when 1 DDR device is required and when 2 DDR devices are required, I think. We don't...

View Article

Re: NO_OS AGC Settings

Kelly, In this case, channels are 0 and 1. Sorry for confusion. We will try to use the same numbering for all the functions.Thanks,Dragos

View Article


Re: ADV7441A questions about automatic mode

Hello Matt,I was mistaken, they use these on an older design that they need for a new customer and can't change the board. Thanks,Frank

View Article

Re: AD9361 - IIO Oscilloscope

What board are you using? Are you sure that you are within the balun passband?

View Article

Image may be NSFW.
Clik here to view.

Re: About the noise of ADAS3022

Hi, Yuji. I don’t see ripple like the one on the scope shots when I tested it on the lab. What input source is being used? When they removed the RC filters, did they probe directly on the input pin?...

View Article


Re: How to deal with the failure report by physdiskwrite.exe during the...

I think the building lord was trying to study the ADI FMCOMMS3 step by step.

View Article


Re: How to deal with the failure report by physdiskwrite.exe during the...

I have encounted almost same problem, and I bought a new SD card and a new card reader and writer by www.jd.com.  And unfortunately, it happened again and the difference was the number of written bytes...

View Article

edit hardwareconfiguration in graphical sigma studio?

Hi at all, is it possible to change the hardwareconfiguration without an external processor? an example:in the hardwareconfiguration in the register SerialOut1 at the adress 2078 i can set the 12th bit...

View Article

Re: problem with interfacing arudino uno with ADIS16480

Thank you for sharing all of this detail. Unfortunately, I am pretty buried at the moment so I don't have time to go through the code that you were kind enough to offer.  Based on the pictures, I would...

View Article

High Speed DAC

Hi, if I buy the AD9142 in tested wafer form, and want to assemble it on my own package layout, will I need to do special "trimming" procedures (like efuse....) after the packaging process ?  If yes,...

View Article


Re: what is the input impedance of AD8513?

thank you JGunao...

View Article

Image may be NSFW.
Clik here to view.

Re: edit hardwareconfiguration in graphical sigma studio?

    Hello hubijo,     You can change the 12th bit (D11) in register 2078 (hex 081E) first by selecting the HW Configuration window and the 170x\140x Register Control tab, which brings up the view shown...

View Article


Re: How to identify which filter is which on

Hi Mark: I believe the addresses assigned are present in a couple of different files. Some of those need to be generated post compile by pressing the button that generates microcontroller export files....

View Article

Re: ADL5511 EVALZ Getting Started

I figured out what's the problem An AC coupler needs to be connected at the output. Otherwise current pulling will exceed the limit.

View Article


Image may be NSFW.
Clik here to view.

Re: Boot DSP

Thank you very much for your comments, Miguel and John. I have added some delays and tried with different delay time, but it doesn't help.I have noticed that SigmaStudio generates different functions...

View Article

Re: AD9361 CMOS Mode

Hi All, After much mucking about it would appear that this post by Tlili  in response to question 5 to be along the correct lines. 5 questions: Multiple AD9361 RF PLL Sync, External LO and others As I...

View Article

Re: Can u-boot act as a USB peripheral rather than USB host?

I don't think we have implemented/tested this from u-boot, but we do have this feature support from Linux, search "gadget" in our document wiki returns some useful information, and this article talks...

View Article
Browsing all 36216 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>