Re: Simulation model for DDS, AD9834
Hi! Thanks!Can you help in selecting right filter at Ad9834. What all inputs you want from me, let me know???Sincere regards,Dr.Babankumar
View ArticleAD7656 Evaluation board schematic
Hi, all. I would like to use AD7656 evaluation board for research.Would you give me this board's schematic? Thanks.
View ArticleRe: AD9914/15 SYNC_CLK outputs during DAC calibration with synchronisation
Hi Quang, Please look at the application note on AD9915 multichip synchronization DSB authored: http://www.analog.com/static/imported-files/application_notes/AN-1254.pdfYou may use AD9914 instead of...
View ArticleRe: Wrong mode register value from AD7730
Hi Kwan Suk Kim, A parallel port is required to interface to the AD7730 eval board. We do have newer devices such as the AD7190 or AD7195. Both of these parts are lower noise than the AD7730. The...
View ArticleRe: High pass filter issue for sigma3.9 version.
Hi Bob I am sorry. I am fill another screenshots appear. Thank you for your help.Thank you. --Paul --
View ArticleRe: AD2S1200 SIN/COS inputs are between input Vpp and threshold LOS/DOS.
Hi Sofy, We are looking into this. We'll get back to you as soon as possible. Thanks and Best Regards,Chris
View ArticleRe: Problems with EVAL-AD7762EDZ
Hi Torsten, I haven't tried the student version but it sounds like there is a compatibility issue with the AD7762 software package. Can you try installing the software in a computer without LabView...
View ArticleRe: AD7656 Evaluation board schematic
Hi, May I ask what evaluation board is in your possession? Can you give me the board name printed as on the PCB? Regards,Karen
View ArticleRe: Error in building blackfin-buidroot-2013R1-RC1
Hi Deep, please always follow our example to build a target http://docs.blackfin.uclinux.org/doku.php?id=buildroot:build-system:build_a_target
View Articlec++ template instantiation & linker
Hi guys, i'm used to try using templates in my project until i started to get the messages from the linker about multiply defined symbolsI found that compiler includes cpp files into other files by...
View ArticleRe: ADV7623 and Fast Switching
Jeyasudha:regarding Q2, what are some factors (other than HDCP handshaking) which can cause excessive switching times? Based on your remark, you imply that the TV or monitor seems to be the culprit....
View ArticleRe: AD9548 DPLL is not locked phase
Dear abatur, Are you saying that it's not phase locked based on what? The lock detector? -Paul
View ArticleRe: Techniques for compensating for effects of temperature on analog...
Thanks for the input. We essentially have arrived at the same conclusion. Unfortunately, the function isn't linear, which makes it a treat to figure out. Thanks.
View ArticleRe: ADIS16480 issue
Yes, we are sorry for the extended response time. The design engineer has looked at the register values and did not noticed anything alarming but did note that this level of vibration might be beyond...
View ArticleRe: Smearing problem when use ADA4858-3 driving and equalizing a 100M VGA cable
hi, will look into this. ill update you soon. thanks,ahbie
View ArticleInput sample scale of HAE in CM40x
Hello, I read the hardware reference manual of CM40x, two questions comes up about the input sample scale of HAE. Question 1: On Page1627: "Processing of two 24-bit signed input channels, consisting of...
View ArticleRe: ADAS3022 input RC Filter issue tracking
Hi, Karen Thanks for your kindly reply soon.The second question detail as below description.1. When the power off of the ADAS3022 and the INx still connect to DUT (power supply).2. The DUT(power...
View ArticleRe: AD9914/15 phase and amplitude during frequency ramp
Then its empirical to turn on profiles if your going to use DRG. Best RegardsLouijie
View ArticleAD-FMCOMMS1: How to make a digital signal from ML605 to analog?
Dear developers,I want to see the signal from my VHDL-code on oscilloscope, need an analog output for ML605. There is also AD-FMCOMMS1, so my first goal is to see analog signal from my code using...
View Article