Re: How to set the ADAS3023 to start?
Hi, It make me about a week to solve, and I have phoned to the custom service of ADi inc.So I need your help ASAP. Thanks,lorime
View ArticleRe: CN0269: 18-Bit, 1.33 MSPS, 16-Channel Data Acquisition System
Hello Sir The design package is updated on website. Please downloaded from the link below:http://www.analog.com/en/circuits-from-the-lab/CN0269/vc.html Sorry for the inconvenience.Wish you all the...
View Articlebaking of AD5346 if using epoxy
If, instead of using high temperature to solder the component, I use a low temperature conductive epoxy (55C) to bond it. Do I still need to bake the component at 150C for 24 hours? \Lego
View ArticleRe: CN0269: 18-Bit, 1.33 MSPS, 16-Channel Data Acquisition System
Willie, Got the update. Thanks for your help. Bob Stachnik -Robert A.Stachnik, M/S 183-401| Robert.A.Stachnik@jpl.nasa.govJet Propulsion Laboratory, | Office: (818) 354-19214800 Oak Grove...
View ArticleRe: AD9910 with 100MHz reference clock
For your purpose, AD9910 is a good choice. we do have newer released and faster parts (AD9914 and AD9915) but I think they will be too expensive for your purpose.You mentioned you are using 100MHz...
View Article[Q] For DDS circuit to control 9ns duty time.
Dear all, Now I have a sudden project to make high precision pwm-generator to control/trigger other instrument.Could somebody help me? Target spec : pwm period : not that fast. 1HZ~ 50KHzduty time :...
View ArticleRe: AD9910 with 100MHz reference clock
It is an OCXO, i am thinking of using an external 10x frequency multiplier and using AD9858.
View ArticleRe: noise of a SDP-B board
Thank you very much. I guess one of your links is where I found the code. Anyway - I now see that there are 3 "generic" drivers: 5780, 57xx and 5791. They are all written by Dan.Nechita@analog.com, so...
View ArticleRe: Kernel panic - not syncing: VFS: Unable to mount root fs
Any progress, Aaron? I'm trying to debug this by learning the whole sequence for driver loading, and which parts happen before or after the root partition is mounted. Seems daunting. I'm hoping you'll...
View ArticleAD5433: CS pin
Hi, I'm evaluating the board that used AD5433. I executed the test that the noise is applied to the board.When the noise is applied to the board, the output of AD5433 is reset to zero.To avoid the...
View ArticleRe: bf609 , how to use rom_Boot() function ?
Don't bother to call any boot_ROM functions. Simply run u-boot command bootelf, bootm, bootldr, etc.
View ArticleRe: TS201S EZ Kit CPLD to communicate with an external A/D converter
Hi Pedro, Refer to the attachment for the CPLD project. Regards,Mahesh
View ArticleAD9361 performance questions
I have some specific questions about the performance of the AD9361 and would appreciate any guidance; How fast does the AGC settles? What is the DC offset and calibration response time? What is the LO...
View ArticleClik here to view.
Problem with sampling via Visual Analog (AD9266-20 and HSC-ADC-EVALCZ)
Hello, I am currently using the AD9266-20 Evaluation Board in combination with the HSC-ADC-EVALCZ and the Visual Analog Software. I seem to be having a problem with the correct acquistion of the data....
View ArticleClik here to view.
In Power OFF, equipment with RS485-I/F is at single.
Dear all, Please let me know about ADM489A.Now, the product which supported RS485 is designed. The RS485-I/F circuit of our product is as attachment.(It includes the following questions) Although...
View ArticleRe: ADV7181D 12 bit RGB 4:4:4 DDR mode
Table 10 shows how the bits are used and Figure 5 shows the timing.
View ArticleAbout ADV7612 User Guide.
Dear All, The I2C address which should not be fixed by default as follows may be described.(http://www.analog.com/static/imported-files/user_guides/UG-216.pdf) DS_WITHOUT_FILTER, Addr 40 (IO), Address...
View ArticleRe: APIX 2
I believe APIX2 is spec'd up to 12m. I am going to forward this post to the ADV7680 expert.
View ArticleRe: About ADV7612 User Guide.
Hello DMN, The addresses you bolded are the i2c map addresses. IO is fixed, the others are programmable but the addresses given are the ones out scripts program for those maps. Dave
View Article