Clik here to view.
Re: dc/dc controller with output of 500 V
Hello Sveta, Perhaps you'd like to avoid transformer-based circuits to save size and weight. That's a fine goal, and it explains why in many applications their use has been declining....
View ArticleRe: dc/dc controller with output of 500 V
Dear Bob,thank you for detailed explanation. This was very helpful.Warm regards,Sveta
View Articleabout ADV7619 4k 2k script config
Hello analog Engineers:I am use ADV7619 as HDMI receiver,I config the ADV7619 chip with the script ADV7619-VER.1.4c.txt.If I config it as 1080p and input video 1080p video it seems work well.but if if...
View ArticleRe: Script file for External SYNC mode of ADV7390
Dear Dave-san, Thank you for your reply.I already checked AOC-1666.But, I could not find the script file which I want. I want the script that is : CVBS in , 8bit YCbCr , HS & VS mode, CVBS output....
View ArticleRe: some basic questions about AD5933
Hi, This is the same thread posted in dds community last feb 26, 2014. Please refer to this thread: http://ez.analog.com/thread/40411 for the continuation of responses.I will now close and lock this...
View ArticleRe: Bandwidth of AD5293
Hi Nom, There has been a case of double posting for this question. You can see the query answered in this thread. I will now close and lock this thread. Thank you. Regards,Mark
View ArticleClik here to view.
Re: working with AD-FMCOMMS1 at low sampling rate
Hi Lars, I've tried building new .bit file with 128bit width on src side between DMAC and PS7 (AXI_interconnect 3) as you suggested.Changing only "DMA data source bus width" from 64 to 128 on DMAC1,...
View ArticleRe: 26PCD Series Pressure Sensor, Honeywell with AD623
Hi Krisf, I would like to amplify the sensor signal from 3.33mV/psi to 0-5V/psi for microcontroller. Ummm, If we see the datasheet of 26PCD, it recommends to use 10V then the sensitivity signal between...
View ArticleHow to set ADV7619 for Deepcolor
In my design, we use ADV7619 with output mode: 2x24-bit SDR 4:4: interleaved mode0,it works fine for 4kx2k 30p, 1920x1080 60p 8bit, but not for 1920x1080 60P 10bit or 12bit. for 1920x1080 60P...
View ArticleRe: IBIS models for AD5441 & AD5446.
Hi Mark, Thank you for your quick response. Regards,Tar-Bow
View ArticleRe: Help w/ ADSP-21489... DUAL SIMD MAC 40bit Floating Point
SHARC® Processor Programming Reference Revision 2.2, March 2011 p.7-45 has the next text:Extended precision can’t be supported in SIMD mode since the both PM and DM data busses are limited to 64-bits...
View ArticleRe: Chinese ADXL345 board for $3?
Hi Tom, Thanks for sharing what you studied. I am also interested in how they control the cost. Checking the picture on website, I did not see anything wrong. Except ADXL345, there are also many cheap...
View ArticleRe: AD5328 stops converting after some time
Hi dorinc, As said in the LOAD DAC Input(/LDAC) FUNCTION Section in page 18 of the data sheet, the operation of the /LDAC function is like that of an OR logic gate. If you wish to control the DAC...
View ArticleRe: A question about AD9915 (3.5 GHz input clock for PLL Disable mode)
Hi Sercan, We'll check on this. We'll get back unto you. RegardsLouije
View ArticleRe: SSM 2018 control voltage scaling
Hi, I moved your question to the Audio community. Someone here should be able to assist you. Thanks, Kris
View ArticleRe: AD9912 Evaluation Board SysClk Input and USB connection
Hi, 1) You may use 0V DC offset.2) Did you use a Windows XP? The software does not work on higher windows.
View ArticleADX345 read output problem
I'm having problem getting the output from this ADXL345.I'm using a LPC1769.This is part of my code: void adxl345_setDataRate (int rate) { uint8_t registerContents = i2c_read_reg (XL345_ALT_ADDR,...
View ArticleRe: ADC 16 or 24 bit
Hi Nick123, We regret to say that we do not have ADC parts that have an internal FIFO (capture buffer). ADI have never created a device with such a function. Anyway, can I ask why are you interested to...
View ArticleRe: API/SDK for AD5667REBZ
Hi Meir, We are looking into this and will get back to you. Regards,Mark
View ArticleRe: MOSFET driver without isolation for half-bridge topology
Hi RSchnell, Thank you very much for your always courteous reply and instructions. I think I have all the information needed at this moment, and again express the best of my appreciation for your...
View Article