FMCOMMS2 Zynq Zedbaord image is missing
Dear All, First let me wish a Merry Christmas to all of you. We wanted to try the linux demo IIOscope. Therefore we downloaded the image from the following...
View ArticleGNU Radio 3.7 drivers for AD-FMCOMMS1-EBZ
Hi,I'd like to get the AD-FMCOMMS1-EBZ board working with GNU Radio 3.7. Are there any drivers developed by Analog Devices? I'd like to run it with the Xilinx ZC702 evaluation board. I can build GNU...
View ArticleI2CWSD for Production
Hi , Could you please let me know if i can use I2CWSD for programming with out closing the application .Like Configure -> Start every time when we need to program a new board . Thanking you With...
View ArticleRe: Instrumentation amplifier
Hi Kris, Thank you for response. My customer needs the low flicker noise at low gain because they use the gain between 1 to 5.Their main requirement is to have lower flicker noise than 10nV/sqrt(Hz) at...
View ArticleRe: ADFMCOMMS1
yes i have done that too.the result is same.Have you seen the output of Local oscillator on oscilloscope ??
View ArticleRe: ADFMCOMMS1
bro for some reason i cant get the edk design to run,after i am done generating .ngc files and .v files using coregen and copying them to their corresponding folders,the design builds smoothly but in...
View ArticleRe: ADFMCOMMS1
what is this software that you are using right now???...have you tried calling daciq correction function???....i see alot of noise in your output...although its an envelope but its not looking as much...
View ArticleClik here to view.
Re: Issue with my ad7609, busy signal o/p..
Hi Steven, Thankyou for your response.1.StevenX wrote:Could you make the issue more clear ? After power up, one CONVST pulse is applied, the BUSY keeps high forever, right?This problem is solved. No...
View ArticleRe: ADFMCOMMS1
i am using chipscope for seeing output of ADC channel....but i would like to explore this software that you are using right now in the attachment pictures
View ArticleRe: ADFMCOMMS1
answer to both you questions with confidencejust checked...the LO is giving a very fine 122.88 Mhz sine wave and please read the following documentation....you can clearly find the answer to your...
View ArticleRe: Large array
But if i store values in 8b long, with 480x270 2D array it should be as low as 0.99Mb ?if i can't store values in ram, can i inside boot flash ?i know that STM32F4 with internal 1M memory can store 5-7...
View ArticleRe: How can I use "Rebuild Project" function in CCES?
Hi, CCES is built on the Eclipse IDDE and, unfortunately, Eclipse does not feature a "Rebuild" option - you need to clean then build your project. Regards,Craig.
View ArticleRe: ADV7181C with NTSC video input
Hello, Are you using the :AUTODETECT CVBS IN NTSC/PAL/SECAM, 8-Bit 422 encoder: script from the latest recommended script file (ADV7181C_ADV7181C@_ADV7341-VER.3.2c.txt) available here? Are you using an...
View ArticleRe: How to determine the ENOB(Equivalent number of bits) of AFE?
The output noise is on page 3. For the AD9945 it is 1.2 LSB rms. This gives an SNR of approximately 70.7 dB. If you prefer, this can be converted to ENOB, which would be roughly 11.5 bits. For imaging...
View ArticleRe: how to create root file system (bf548) in linux
hi,we are running with "jffs2" ,but when we compiled we are getting error as mention below, bfin> bootm 0x20100000 0x20300000## Booting kernel from Legacy Image at 20100000 ... Image Name:...
View ArticleRe: ADV7619 2xSDR modes (modes (not only) for >170MHz LLC)
Hello, I'm afraid that is not a possible mode for ADV7619. Dave
View ArticleRe: ADV7842-VER.5.9c_AVEB.txt question?
Hello, I2C address 0x50 is for a device on a different evaluation board-- you can ignore it. Dave
View ArticleRe: Video Decoding & Compression
Hi Sunil, I believe the Blackfin guys have IP that can do this from 3rd parties listed here: http://www.analog.com/en/third-party-developers/processors-dsp/content/search.html I would imagine that IP...
View Article