Hi,
1. I have the same observations. There are a lot of other mistakes in the UG-180 and UG-216 documents also.
For example according to CEA-861 Video ID Codes 17,18, 21, 22, 25, 26, 29, 30, 37, 38 are 50 Hz formats but in UG-180 and UG-216 inside Table 7 they are mentioned as 60 Hz formats.
2. I'd like to use ADV7611 with input resolutions using in digital TV (720x576 50i, 720x576 50p, 1280x720 50p, 1920x1080 50i). For these resolution in ADV7611-VER.2.9c script always the HDMI-GR mode is recommended. But in this forum in several threads the HDMI-Comp is suggested for these standard resolutions. Which solution is better?
3. I'd like to use the Free Running Mode1. When I select 1920x1080 50i output format it works properly but in case of 720x576 50i format it doesn't work. The LLC frequemcy on pin25 is always 13.5 MHz instead of 27 MHz. Which setting is wrong?
Thanks,
Peter