Hello Dragos,
thanks for your fast answer!!!
We are using :
ZC702 + ADFMCOMS-EB2
Hardware is OK becasuse in the "boot" from the SD card the console mesages reppor all the test OK regarding the AD9361 drivers and conexions while having the ADFMCOMMS board conected in FMC1 of the ZC702
We are using the ZIPPED version you published in this chat to compile and run (same problems are repported from the downloaded files from the wiki)
Another problem we have is with the original SD card . We could no read the SD card in 2 SD card readers.
Finally we could install a SD card from the downloaded image in internet .
We had access to the BOOT and rootfs partitions , we extracted in the BOOT top the appropiate files for the ZC702 + AD9361 and we where able to make the board download the bit file in the FPGA , to make the test (included the AD9361 test) , in the HDMI screen we can see the Linux Logo but when the system try to start to mount the rootfs file sistem we have a KERNEL PANIC crahs.... it looks the system is not able to locate the rootfs partition.
There are any instructions to create the SD card appropiate partitions? We see in the Wiki that to install Ubuntu-Linux Desktop we have to made a 36G FAT32 + EXT4 partitions but the partitions inthe SD card image for the demo board is 256MB FAT32 + EXT4 partition.
We need help to create the appropiate partitions in the SD card and available repositories to download the rootfs files .
Thanks,
Francisco