Hi Adrain,
Thanks replying for my request,
Actually we are using AD9634 in our board with zynq as BBP, somewhere i read in AD website that only difference in AD9634 and AD9631 is the number of channels present in it for receiving as well as transmitting part.
Hence the design is for custom requirement we are not supposed to use any of the evaluation boards. All the design should be present in 1 single board only, here are my requirements and followed design in our custom board.
1) Acquisition of analog frequency from 70MHz to 2.5GHz and for restricting all other frequencies above 2.5GHz we have used Balun and Line Transformer of 2.5GHz maximum allowed frequency.
2) By using differential amplifier ADL5565 signal is fed to anti aliasing filter which is driven by LC combination to attain more accuracy.
3) While transmitting part from DAC we need more accuracy in transmitting particular exact frequency, for this i need help how to use decimation functions to program into AD9634.
4) Regarding clock frequency do we need to use any clock Generator / synthesizer for giving input clock frequency for AD9634, as we should be able to sample higher frequencies up-to 2.5GHz , or is it possible to program this also within AD9634 using BB PLL and VCO present inside and in which clock is fed by crystal/external input.
These are our requirements and design followed now, please guide us on hardware design part if any wrong has been followed as above said design.
I also need some guidelines on generating HDL from matlab app provided in website and achieving our design.