Quantcast
Channel: EngineerZone: Message List
Viewing all articles
Browse latest Browse all 36216

Re: Loading uClinux on bf527

$
0
0

bfin> run ramboot

Using bfin_mac device

TFTP from server 10.99.24.50; our IP address is 10.99.24.115

Filename 'uImage.527.2012R2'.

Load address: 0x1000000

Loading: #################################################################

         #################################################################

         #################################################################

         ############################################################

         6 MiB/s

done

Bytes transferred = 3735563 (39000b hex)

## Booting kernel from Legacy Image at 01000000 ...

   Image Name:   bf527-0.2-3.5.7-ADI-2012R2-00001

   Created:      2013-09-13   3:37:08 UTC

   Image Type:   Blackfin Linux Kernel Image (gzip compressed)

   Data Size:    3735499 Bytes = 3.6 MiB

   Load Address: 00001000

   Entry Point:  00274db4

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK

Starting Kernel at = 00274db4

Linux version 3.5.7-ADI-2012R2-00001-gf6ffa96-dirty (root@lab-desktop) (gcc vers                                                                                        ion 4.3.5 (ADI-2012R2-RC2) ) #2 Fri Sep 13 11:37:04 CST 2013

register early platform devices

bootconsole [early_shadow0] enabled

bootconsole [early_BFuart1] enabled

early printk enabled on early_BFuart1

Board Memory: 64MB

Kernel Managed Memory: 64MB

Memory map:

  fixedcode = 0x00000400-0x00000490

  text      = 0x00001000-0x001a5eb0

  rodata    = 0x001a5eb0-0x00233de0

  bss       = 0x00234000-0x00247e1c

  data      = 0x00247e20-0x0026c000

    stack   = 0x0026a000-0x0026c000

  init      = 0x0026c000-0x004bf000

  available = 0x004bf000-0x03f00000

  DMA Zone  = 0x03f00000-0x04000000

Hardware Trace active and enabled

Boot Mode: 1

Blackfin support (C) 2004-2010 Analog Devices, Inc.

Compiled for ADSP-BF527 Rev 0.2

Blackfin Linux support by http://blackfin.uclinux.org/

Processor Speed: 525 MHz core clock and 131 MHz System Clock

NOMPU: setting up cplb tables

Instruction Cache Enabled for CPU0

  External memory: cacheable in instruction cache

Data Cache Enabled for CPU0

  External memory: cacheable (write-back) in data cache

Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 16002

Kernel command line: root=/dev/mtdblock0 rw clkin_hz=25000000 earlyprintk=serial                                                                                        ,uart1,57600 console=ttyBF1,57600 ip=10.99.24.115:10.99.24.50:10.99.24.1:255.255                                                                                        .255.0:bf527-ezkit:eth0:off

PID hash table entries: 256 (order: -2, 1024 bytes)

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory available: 59044k/65536k RAM, (2380k init code, 1683k kernel code, 793k d                                                                                        ata, 1024k dma, 612k reserved)

NR_IRQS:159

Configuring Blackfin Priority Driven Interrupts

Console: colour dummy device 80x25

console [ttyBF1] enabled, bootconsole disabled

console [ttyBF1] enabled, bootconsole disabled

Calibrating delay loop... 1044.48 BogoMIPS (lpj=2088960)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

devtmpfs: initialized

Blackfin Scratchpad data SRAM: 4 KB

Blackfin L1 Data A SRAM: 16 KB (16 KB free)

Blackfin L1 Data B SRAM: 16 KB (16 KB free)

Blackfin L1 Instruction SRAM: 48 KB (41 KB free)

NET: Registered protocol family 16

Blackfin DMA Controller

ezkit_init(): registering device resources

bio: create slab <bio-0> at 0

SCSI subsystem initialized

bfin-spi bfin-spi.0: master is unqueued, this is deprecated

bfin-spi bfin-spi.0: Blackfin on-chip SPI Controller Driver, Version 1.0, regs@f                                                                                        fc00500, dma channel@7

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

i2c-bfin-twi i2c-bfin-twi.0: Blackfin on-chip I2C TWI Contoller, regs_base@ffc01                                                                                        400

Advanced Linux Sound Architecture Driver Version 1.0.25.

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP: reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

debug-mmrs: setting up Blackfin MMR debugfs

msgmni has been set to 115

io scheduler noop registered (default)

dma_alloc_init: dma_page @ 0x02657000 - 256 pages at 0x03f00000

Console: switching to colour frame buffer device 40x30

bfin-lq035q1 bfin-lq035q1: 320x240 16-bit RGB FrameBuffer initialized

bfin-uart: Blackfin serial driver

bfin-uart.1: ttyBF1 at MMIO 0xffc02000 (irq = 31) is a BFIN-UART

bfin-otp: initialized

brd: module loaded

m25p80 spi0.1: m25p16 (2048 Kbytes)

Creating 2 MTD partitions on "m25p80":

0x000000000000-0x000000040000 : "bootloader(spi)"

0x000000040000-0x000000200000 : "linux kernel(spi)"

bfin_mii_bus: probed

bfin_mac: attached PHY driver [Generic PHY] (mii_bus:phy_addr=bfin_mii_bus-0:01,                                                                                         irq=-1, mdc_clk=2500000Hz(mdc_div=25)@sclk=131MHz)

bfin_mac bfin_mac.0: eth0: Blackfin on-chip Ethernet MAC driver, Version 1.1

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)

input: adp5520-keys as /devices/platform/i2c-bfin-twi.0/i2c-0/0-0032/adp5520-keys.5520/input/input0

ad7879 0-002c: Failed to write AD7879 Touchscreen

ad7879: probe of 0-002c failed with error -1

rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0

bfin_wdt: initialized: timeout=20 sec (nowayout=0)

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

bfin-i2s bfin-i2s.0: dma rx:3 tx:4, err irq:15, regs:ffc00800

soc-audio soc-audio: ASoC machine bfin-ssm2602 should use snd_soc_register_card()

ssm2602 0-001b: Failed to issue reset: -5

ssm2602 0-001b: asoc: failed to probe CODEC ssm2602.0-001b: -5

asoc: failed to instantiate card bfin-ssm2602: -5

soc-audio soc-audio: Failed to register card

soc-audio: probe of soc-audio failed with error -5

TCP: cubic registered

NET: Registered protocol family 17

rtc-bfin rtc-bfin: setting system clock to 1970-10-26 05:27:00 UTC (25766820)

IP-Config: Complete:

     device=eth0, addr=10.99.24.115, mask=255.255.255.0, gw=10.99.24.1

     host=bf527-ezkit, domain=, nis-domain=(none)

     bootserver=10.99.24.50, rootserver=10.99.24.50, rootpath=

ALSA device list:

  No soundcards found.

Freeing unused kernel memory: 2380k freed

 

 

BusyBox v1.20.2 (2013-09-13 11:32:19 CST) hush - the humble shell


Viewing all articles
Browse latest Browse all 36216

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>