AD9680-1000EBZ Unusually High Input Power

Hello,

I am testing the AD9680-1000EBZ at 1 GHz clock rate. I set up everything according to the User's Guide and I'm using the default VisualAnalog template to view my results. I was injecting a single tone CW signal (I believe it was < 500 MHz) but I kept getting a very low dBFS on the fundamental in VisualAnalog. I cranked my signal generator up to its max power output (20 dBm) and it the fundamental was still sitting around -30 dBFS. Granted we have some cable loss and filter loss but that does not account for the massive difference between the input power and dBFS readings. I also don't believe that the matching network is so poorly designed as to affect the circuit so much. What could be going on?

Thanks in advance.