Hi Sachin,
Thanks for the suggestion.
The adi_ssl_init.c file was changed accordingly to suit my board. The board is working fne with other applications like LAN, UART etc with system services and device drivers. Hence i think adi_ssl_init.c file is changed correctly for my board.
As you have suggested i have tested the TWI interface. The observation is that after the start bit, 7-bit address and R/R bit I am getting a negative acknowledge. And I am getting error code some times 0x00000001 and sometimes 0x40000017.
Hence please commend on this.
Thanks
Gireesh.M.